List of ISO standards

This is a list of ISO standards that are discussed in Wikipedia articles. For a list of all the more than 16,000 ISO standards (as of 2007), see the ISO Catalogue.
About 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely/publicly available.[1]
Contents
• 1 ISO 1–ISO 999
• 2 ISO 1000–ISO 9999
• 3 ISO 10000–ISO 19999
• 4 ISO 20000–ISO 29999
• 5 ISO 30000–ISO 39999
• 6 Other standards
• 7 See also
• 8 References
• 9 External links
ISO 1–ISO 999
• ISO 1 Standard reference temperature for geometrical product specification and verification
• ISO 3 Preferred numbers
• ISO 4 Rules for the abbreviation of title words and titles of publications
• ISO 7 Pipe threads where pressure-tight joints are made on the threads
• ISO 9 Information and documentation — Transliteration of Cyrillic characters into Roman characters — Slavic and non-Slavic languages
• ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)
• ISO 31 Quantities and units
• ISO 68-1 Basic profile of metric screw threads
• ISO 216 paper sizes, e.g. the A4 paper size
• ISO 226 Phon based on Fletcher-Munson curves

• ISO 226:2003 Phon based on newer Equal-loudness contours

• ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation.
• ISO 233:1984 Transliteration of Arabic characters into Roman characters

• ISO 233-2:1993 Transliteration of Arabic characters into Roman characters — Part 2: Arabic language — Simplified transliteration

• ISO 259:1984 Documentation — Transliteration of Hebrew characters into Roman characters

• ISO 259-2:1994 Transliteration of Hebrew characters into Roman characters — Part 2: Simplified transliteration

• ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
• ISO 500 Agricultural tractors — Rear-mounted power take-off
• ISO 639 Codes for the representation of names of languages

• ISO 639-1 Codes for the representation of names of languages — Part 1: Alpha-2 code
• ISO 639-2 Codes for the representation of names of languages — Part 2: Alpha-3 code
• ISO 639-3 Codes for the representation of names of languages — Part 3: Alpha-3 code for comprehensive coverage of languages
• ISO 639-5

• ISO/IEC 646 internationalized 7 bit ASCII variants
• ISO 657 Hot-rolled steel sections
• ISO 668 Specification for Shipping Containers
• ISO 690 bibliographic references
• ISO 732 Photography — 120-size and 220-size films — Dimensions
• ISO 838 Standard for punching filing holes into paper
• ISO 843:1997 Conversion of Greek characters into Roman characters
• ISO 999 Guidelines for the content, organization, and presentation of indexes
ISO 1000–ISO 9999
• ISO 1000 SI units and recommendations for the use of their multiples and of certain other units
• ISO 1004 Magnetic ink character recognition
• ISO 1007 135 film format
• ISO/IEC 1539 Fortran programming language
• ISO 1629 Establishes a system of terms and nomenclature for polymers
• ISO/IEC 2022 Information technology: Character code structure and extension techniques
• ISO 2108 International standard book numbering (ISBN)
• ISO 2145 Numbering of divisions and subdivisions in written documents
• ISO 2171 Cereals and milled cereal products — Determination of total ash
• ISO 2281 Water-resistant watches
• ISO 2533 Standard Atmosphere
• ISO 2709 Format for information exchange (e.g. MARC)
• ISO 3029 126 film format
• ISO 3082 Iron ores — Sampling and sample preparation procedures
• ISO 3103 Method of brewing tea for the purpose of sensory tests
• ISO 3166 codes for countries and subdivisions

• ISO 3166-1 codes for country and dependent area names, first published in 1974

- ISO 3166-1 alpha-2 two-letter country codes
- ISO 3166-1 alpha-3 three-letter country codes
- ISO 3166-1 numeric

• ISO 3166-2 principal subdivisions of a country or dependent area.
• ISO 3166-3 superseded ISO 3166-1 codes, first published in 1998.

• ISO 3297 International standard serial number (ISSN)
• ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners.
• ISO 3602 Romanization of Japanese
• ISO 3632 Quality of Saffron
• ISO 3635:1981 Size designation of clothes — Definitions and body measurement procedure
• ISO 3864 Safety labels
• ISO 3901 International Standard Recording Code (ISRC)
• ISO 3977 Design and procurement standards for gas turbine system applications
• ISO 4157 Subdivision of construction works

• ISO 4157-1: buildings and part of buildings
• ISO 4157-2: room numbers
• ISO 4157-3: room identifiers

• ISO 4217 Currency codes
• ISO/IEC 4873:1991 8-bit code for information interchange
• ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full

• ISO 5167-1 Part 1: General principles and requirements
• ISO 5167-2 Part 2: Orifice plates
• ISO 5167-3 Part 3: Nozzles and Venturi nozzles
• ISO 5167-4 Part 4: Venturi tubes

• ISO 5218 Representation of human sexes
• ISO 5455 Technical drawings: scales
• ISO 5775 Bicycle tyres and rims
• ISO 5800 Photographic Film speed
• ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri
• ISO 5971:1981 Size designation of clothes — Pantyhose
• ISO 6166 structure of an International Securities Identifying Number (ISIN)
• ISO 6344 Coated abrasives — Grain size analysis

• ISO 6344-1 Part 1: Grain size distribution test
• ISO 6344-2 Part 2: Determination of grain size distribution of macrogrits P12 to P220
• ISO 6344-3 Part 3: Determination of grain size distribution of microgrits P240 to P2500

• ISO 6429 Information technology: Control functions for coded character sets
• ISO 6438 Documentation — African coded character set for bibliographic information interchange
• ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations
• ISO 6946 Building components and building elements — Thermal resistance and thermal transmittance — Calculation method
• ISO 7001 Public Information Symbols
• ISO 7002 Agricultural food products — Layout for a standard method of sampling from a lot
• ISO 7098 Romanization of Chinese
• ISO 7372 Trade data interchange
• ISO/IEC 7501-1:1997 Identification cards — Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)
• ISO 7736 Car radio installation space
• ISO 7810 Standards for financial cards (credit and debit cards)
• ISO 7811 Recording technique on identification cards
• ISO 7816 Smartcards
• ISO/IEC 7942 Graphical Kernel System
• ISO 8090 Cycles — Terminology
• ISO 8373 Manipulating Industrial Robots — Vocabulary
• ISO 8402 Quality Management and Quality Assurance - Vocabulary
• ISO 8501-1 Preparation of steel substrates before application of paints and related products
• ISO 8555 Environmental management systems.
• ISO 8559:1989 Garment construction and anthropometric surveys — Body dimensions
• ISO 8583 Financial transaction card originated messages — Interchange message specifications

• ISO 8583-1 Part 1: Messages, data elements and code values
• ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)
• ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values

• ISO 8601 Date and time representation
• ISO/IEC 8613 Open Document Architecture
• ISO/IEC 8632 Computer Graphics Metafile
• ISO 8651 Graphical Kernel System language bindings
• ISO/IEC 8652: Information technology — Programming languages — Ada
• ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806.
• ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings
• ISO 8807: Language Of Temporal Ordering Specification (LOTOS)
• ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)
• ISO/IEC 8825 ASN.1 Encoding Rules
• ISO 8859 8-bit coded character sets

• ISO 8859-1 Latin-1
• ISO 8859-2 Latin-2
• ISO 8859-3 Latin-3 or "South European"
• ISO 8859-4 Latin-4 or "North European"
• ISO 8859-5 Cyrillic
• ISO 8859-6 Arabic
• ISO 8859-7 Greek
• ISO 8859-8 Hebrew
• ISO 8859-9 Latin-5
• ISO 8859-10 Latin-6, rearrangement of 8859-4
• ISO 8859-11 Thai
• ISO 8859-13 Latin-7 or "Baltic Rim"
• ISO 8859-14 Latin-8 or "Celtic"
• ISO 8859-15 Latin-9, revision of 8859-1
• ISO 8859-16 Latin-10 South-Eastern European languages and others

• ISO 8879 Standard Generalized Markup Language (SGML)
• ISO 9000 Quality management system in production environments
• ISO 9001 Quality management
• ISO 9069 SGML support facilities — SGML Document Interchange Format (SDIF)
• ISO/IEC 9075 SQL
• ISO 9126 Software quality model
• ISO 9141 Network interconnection of computers in a vehicle

• ISO 9141-2 OBD-II standard, aka 9141 CARB standard

• ISO 9241 Ergonomic requirements for office work with visual display terminals
• ISO 9362 Bank Identifier Code or BIC system
• ISO 9407 Shoe sizes
• ISO/IEC 9541 Information technology — Font information interchange

• ISO/IEC 9541-1:1991 Information technology — Font information interchange — Part 1: Architecture
• ISO/IEC 9541-2:1991 Information technology — Font information interchange — Part 2: Interchange Format
• ISO/IEC 9541-3:1994 Information technology — Font information interchange — Part 3: Glyph shape representation

• ISO 9564 Banking — Personal Identification Number (PIN) management and security (in ATM and POS systems)
• ISO/IEC 9579 Remote database access for SQL
• ISO 9592, ISO 9593 PHIGS (Programmer's Hierarchical Interactive Graphics System)
• ISO 9660 CD-ROM file system
• ISO 9869 Thermal insulation — Building elements — In-situ measurements of thermal resistance and thermal transmittance
• ISO 9899 C programming language
• ISO/IEC 9945 Portable Operating System Interface (POSIX)
• ISO 9984 Conversion of Georgian characters into Roman characters
• ISO 9985 Conversion of Armenian characters into Roman characters
• ISO 9992:1999 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
• ISO 9999 Technical aids for persons with disabilities. Classification and terminology
ISO 10000–ISO 19999
• ISO 10006 Quality management — Guidelines to quality in project management
• ISO 10007 Quality management — Guidelines for configuration management
• ISO 10012 Measurement management systems — Requirements for measurement processes and measuring equipment
• ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
• ISO/IEC 10026 Open Systems Interconnection
• ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance
• ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange — 650 MB per cartridge
• ISO 10160 Interlibrary Loan Application Service Definition — defines terminology used in interlibrary loan
• ISO 10161 Interlibrary Loan Application Protocol
• ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)
• ISO 10202:1991 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
• ISO 10206 Extended Pascal (programming language)
• ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
• ISO 10279 BASIC programming language
• ISO 10303 Industrial automation systems and integration — Product data representation and exchange. Known as STEP, STandard for the Exchange of Product data
• ISO 10383 Securities and related financial instruments — Codes for exchanges and market identification (MIC)
• ISO 10487 Connections for passenger car stereos
• ISO 10628 Flow diagrams for process plants
• ISO 10646 Universal Character Set (equivalent to Unicode's character set)
• ISO 10664 Hexalobular internal driving feature for bolts and screws — Torx screw head
• ISO 10957 Information and documentation — International Standard Music Number (ISMN)
• ISO 10962 Securities and related financial instruments — Classification of Financial Instruments (CFI code)
• ISO 11064 Ergonomic Design of Control Centres

• ISO 11062-1:2000 Part 1: Principles for the design of control centres
• ISO 11062-2:2000 Part 2: Principles for the arrangement of control suites
• ISO 11062-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
• ISO 11062-3:2004 Part 4: Layout and dimensions of workstations
• ISO 11062-3:2005 Part 6: Environmental requirements for control centres

• ISO/IEC 11172 MPEG-1
• ISO 11170:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics
• ISO/IEC 11179 Information Technology — Metadata Registries (MDR)

• ISO/IEC 11179-1:2004 Part 1: Framework
• ISO/IEC 11179-2:2005 Part 2: Classification
• ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
• ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
• ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
• ISO/IEC 11179-6:2005 Part 6: Registration

• ISO 11180 Postal addressing
• ISO/IEC 11404:1996 Language-independent datatypes (See also General purpose datatypes
• ISO 11469:2000 Plastics -- Generic identification and marking of plastics products
• ISO 11521 Replaced by ISO 15022
• ISO/IEC 11578:1996 Information technology — Open Systems Interconnection — Remote procedure call (RPC)
• ISO 11783 aka. IsoBus — J1939-based communication protocol for the agriculture industry.
• ISO/IEC 11801 Information technology — Generic cabling for customer premises
• ISO 11898 Road vehicles — Controller area network (CAN)
• ISO 12006 Building construction. Organization of information about construction works.
• ISO 13239 High-level data link control (HDLC) procedures
• ISO/IEC 13249 SQL multimedia and application packages
• ISO/IEC 13250 Topic map
• ISO 13346 Volume and file structure of write-once and rewritable media, which UDF is based on.
• ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
• ISO 13406 Ergonomic requirements for work with visual displays based on flat panels

• ISO 13406-1:1999 Part 1: Introduction
• ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays

• ISO 13407:1999 Human-centred design processes for interactive systems
• ISO 13450 110 film format
• ISO 13485:2003 Comprehensive management system for the design and manufacture of medical devices.
• ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk media for information interchange
• ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
• ISO/IEC 13568:2002 Information Technology — Z Formal Specification Notation — Syntax, Type System and Semantics
• ISO 13616 Bank Account Numbers (IBAN)
• ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
• ISO/IEC 13818 MPEG-2
• ISO 14000 Environmental Management Standards in production environments
• ISO 14001 Environmental Management
• ISO 14064 Greenhouse Gases
• ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000

• ISO 14230-1 Physical layer
• ISO 14230-2 Data link layer
• ISO 14230-3 Application layer
• ISO 14230-4 Requirements for emission-related systems

• ISO/IEC 14443 Identification cards — Contactless integrated circuit(s) cards — Proximity cards
• ISO/IEC 14496 MPEG-4
• ISO 14644 Standards Cleanrooms and associated controlled environments

• ISO 14644-1 Classification of Air Cleanliness
• ISO 14644-2 Testing and Monitoring to prove Compliance
• ISO 14644-3 Metrology & Test Methods
• ISO 14644-4 Design, Construction and Start-up
• ISO 14644-5 Operations
• ISO 14644-6 Vocabulary
• ISO 14644-7 Separative Devices
• ISO 14644-8 Classification of Airborne Molecular Contamination
• ISO 14644-9 Clean Surfaces

• ISO 14651 Information technology: International string ordering and comparison
• ISO 14698 Standards

• ISO-14698-1 Bio-contamination Control — General Principles
• ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data

• ISO 14750 Information technology — Open Distributed Processing — Interface Definition Language
• ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646
• ISO 14855-1:2005 Aerobic Biodegradation under controlled composting conditions
• ISO 14855-2:2007 Aerobic Biodegradation under controlled composting conditions with gravimetric measurement of carbon dioxid
• ISO/IEC 14882 Programming Languages — C++
• ISO 14915 Software ergonomics for multimedia user interfaces

• ISO 14915-1:2002 Part 1: Design principles and framework
• ISO 14915-2:2003 Part 2: Multimedia navigation and control
• ISO 14915-3:2002 Part 3: Media selection and combination

• ISO 14971 Medical Devices — Application Of Risk Management To Medical Devices
• ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
• ISO 15000 Electronic business eXtensible Markup Language ebXML

• ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
• ISO 15000-2:2004 Part 2: Message service specification (ebMS)
• ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
• ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
• ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)

• ISO 15022 Securities: Scheme for messages(Data Field Dictionary)
• ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
• ISO 15189 Medical laboratories — Particular requirements for quality and competence
• ISO 15288 Systems engineering — System life cycle processes
• ISO 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
• ISO/IEC 15291: Information technology — Programming languages — Ada Semantic Interface Specification (ASIS)
• ISO/IEC 15408 Common Criteria — Evaluation Criteria for Information Technology Security
• ISO/IEC 15434 2D Data Matrix barcode
• ISO/IEC 15444 JPEG 2000
• ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
• ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination).
• ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test
• ISO 15686 Service life planning for constructive works in 10 parts
• ISO 15693 Transponders
• ISO 15706 International Standard Audiovisual Number
• ISO 15707 International Standard Musical Work Code
• ISO 15836 The Dublin Core metadata element set
• ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
• ISO 15924 Codes for the representation of names of scripts
• ISO 15930 Portable Document Format (PDF)
• ISO/IEC 15948:2003 Portable Network Graphics (PNG)
• ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
• ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
• ISO/IEC 16262 ECMAScript
• ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronics equipment.
• ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
• ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design
• ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
• ISO/IEC 17025 General requirements for competence of test and calibration laboratories
• ISO 17776 : Petroleum industries
• ISO/IEC 17799 Information technology: Code of practice for information security management
• ISO/IEC 17894 Ships and marine technology — Computer applications — General principles for development and use of PES in marine applications
• ISO 18000-7 Wireless standard for active RFID (Radio Frequency Identification)
• ISO/IEC 18004: QR Code Standardization
• ISO/IEC 18009: Information technology — Programming languages — Ada: Conformity assessment of a language processor (ACATS)
• ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
• ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
• ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
• ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)
• ISO 18629 standardized Process Specification Language (PSL).
• ISO 19005 PDF
• ISO 19011 standard providing guidelines for quality and environmental management systems auditing
• ISO 19092-1 Financial Services — Security — Part 1: Security framework
• ISO 19092-2 Financial Services — Security — Part 2: Message syntax and cryptographic requirements
• ISO 19101 Geographic Information: Reference model
• ISO 19105 Geographic Information: Conformance and testing
• ISO 19107 Geographic Information: Spatial schema
• ISO 19108 Geographic Information: Temporal schema
• ISO 19109 Geographic Information: Rules for Application Schema
• ISO 19110 Geographic Information: Feature cataloguing methodology
• ISO 19111 Geographic Information: Spatial referencing by coordinates
• ISO 19111 Geographic Information: Spatial referencing by identifier
• ISO 19113 Geographic Information: Quality principles
• ISO 19114 Geographic Information: Quality evaluation procedures
• ISO 19115 Geographic Information: Metadata
• ISO 19123 Geographic Information: Coverage schema
• ISO 19128 Geographic Information: Web Map Service
• ISO 19131 Geographic Information: Data product specification
• ISO 19136 Geographic Information: Geography Markup Language
• ISO/IEC 19501 Unified Modeling Language (UML)
• ISO/IEC 19502 Meta-Object Facility (MOF)
• ISO/IEC 19503 XML Metadata Interchange (XMI)
• ISO/IEC 19757 Document Schema Definition Languages (DSDL)

• ISO/IEC FDIC 19757-2 Regular-grammar-based validation RELAX NG
• ISO/IEC 19757-3 Rule-based validation — Schematron
• ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)

• ISO/IEC 19770 Information technology — Software asset management
• ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
• ISO/IEC 19794 Information technology - Biometric data interchange formats

• ISO/IEC 19794-1:2006 Part 1: Framework
• ISO/IEC 19794-2:2005 Part 2: Finger minutiae data
• ISO/IEC 19794-3:2006 Part 3: Finger pattern spectral data
• ISO/IEC 19794-4:2005 Part 4: Finger image data
• ISO/IEC 19794-5:2005 Part 5: Face image data
• ISO/IEC 19794-6:2005 Part 6: Iris image data
• ISO/IEC 19794-7:2007 Part 7: Signature/sign time series data
• ISO/IEC 19794-8:2006 Part 8: Finger pattern skeletal data
• ISO/IEC 19794-9:2007 Part 9: Vascular image data
• ISO/IEC 19794-10:2007 Part 10: Hand geometry silhouette data

ISO 20000–ISO 29999
• ISO/IEC 20000:2005 IT Service Management System (based on BS15000)
• ISO 20022 Financial Services — universal financial industry message scheme
• ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency

• ISO/IEC TR 20943-1:2003 Part 1: Data elements
• ISO/IEC TR 20943-3:2004 Part 3: Value domains

• ISO 22000 Food safety management systems — Requirements for any organization in the food chain
• ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
• ISO/IEC TR 22250 Regular Language description for XML — (RELAX)

• ISO/IEC TR 22250-1:2002 RELAX Core

• ISO/PAS 22399:2007 Social security - Guideline for incident preparedness and operational continuity management
• ISO 22716:2007: Cosmetics.
• ISO/IEC 23270:2003 C# Programming Language
• ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)

• ISO/IEC 23360-1 — Part 1: Generic specification
• ISO/IEC 23360-2 — Part 2: Specification for IA32 architecture
• ISO/IEC 23360-3 — Part 3: Specification for IA64 architecture
• ISO/IEC 23360-4 — Part 4: Specification for AMD64 architecture
• ISO/IEC 23360-5 — Part 5: Specification for PPC32 architecture
• ISO/IEC 23360-6 — Part 6: Specification for PPC64 architecture
• ISO/IEC 23360-7 — Part 7: Specification for S390 architecture
• ISO/IEC 23360-8 — Part 8: Specification for S390X architecture

• ISO 23950 Library standard ANSI/NISO Z39.50 — Protocol for searching and retrieving information, usually from bibliographic records
• ISO/IEC 24727 Identification Cards — Integrated Circuit Card Programming Interfaces

• ISO/IEC 24727-1 — Part 1: Architecture
• ISO/IEC 24727-2 — Part 2: Generic card interface
• ISO/IEC 24727-3 — Part 3: Application interface
• ISO/IEC 24727-4 — Part 4: API Administration
• ISO/IEC CD 24727-5 — Part 5: Testing
• ISO/IEC FCD 24727-6 — Part 6: Registration authority procedures for the authentication protocols for interoperability

• ISO/IEC 24744:2007 Software Engineering — Metamodel for Development Methodologies
• ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for information
and communications technology disaster recovery services
• ISO/IEC DIS 25961 Recommended Practice for Architectural Description of Software-Intensive Systems. See IEEE 1471
• ISO26000 Guideline about Social Responsibility also called ISO SR
• ISO/IEC 26300 OpenDocument Format (.odf)
• ISO/IEC 27001 Information technology — Security techniques — Information security management systems — Requirements
• ISO/IEC 29119 Software Testing [2]

• ISO/IEC 29119-1 — Part 1: Concepts & Vocabulary
• ISO/IEC 29119-2 — Part 2: Test Process
• ISO/IEC 29119-3 — Part 3: Test Documentation
• ISO/IEC 29119-4 — Part 4: Test Techniques

• ISO/IEC 29500 Office Open XML
ISO 30000–ISO 39999
• ISO 32000 — Portable Document Format.
• ISO/IEC 38500 — Corporate Governance of Information Technology

Other standards
• ISO 9845 (AM 1.5).
See also
• International Classification for Standards
• ISO/TS 16949
• List of IEC standards
• List of EN standards


Source: http://en.wikipedia.org/wiki/List_of_ISO_standards